Wet molding
HRC possesses varies composite manufacturing technologies from most advanced mass production processing system.

Recycled fiber mats can be used in the wet molding process. The manufacturing process for the fiber mats can reuse materials such as the waste product from cutting fiber mats made of continuous fibers. This involves binding the individual fibers and forming them into mats again. However, the fibers are no longer aligned, but instead statically distributed. The flow resistance would be extremely high for impregnation in a closed mold, which is why the resin is added outside of the mold.

Short cycle time via resin application outside the press

High level of productivity through multiple insertion of the press

Unwind the fiber material and cut fiber blanks

Stack the blanks to create the correct layup

Insert the fiber stack into the mold

Apply the resin through a dispenser

Close the mold and impregnate the fiber stack by the stroke of the press

Cure the resin while maintaining pressure on the mold

Demold the fully cured part

HP-RTM

Efficient process for mass production using high pressure RTM technology .

DISCOVER MORE
RTM

Small to medium resin transfer molding process .

DISCOVER MORE
Shanghai

22D, Crystal Century Tower.
No. 567 Weihai Road, Jingan
+86-21-31013077

GOOGLE MAP
Changshu

National High-tech industrial
No. 58 Huangshan Road.
+86-512-52888886

GOOGLE MAP
Barcelona

Paseo de Gracia 1B-2
No. 48 Barcelona
+34-938328227

GOOGLE MAP
Augsburg

Mittleren Moos 53
H4 Forum
86167 Augsburg

GOOGLE MAP